Adding electrical devices to your motorcycle or automobile without cutting the OEM wiring harness has always been difficult. These ATM fuse panel plug-ins quickly and easily add an additional fused circuit to any vehicle that uses the small ATM style fuses. Simply remove an Accessory fuse (or other appropriate fuse) from your existing fuse panel and install the HD Fuse Tap in its place. Replace the original fuse in one fuse position and add a new fuse to the second fuse position, wiring your new device to the attached pigtail on the fuse tap. Simple, easy and no cutting of your OEM wiring harness.
Not recommended for electrical devices requiring more than 5.0 amps. Consult your vehicle Owners Manual to make sure your electrical system, battery and fuse panel is capable of supporting the extra load.